매달, 우리는 1000명 이상의 사람들이 시험 준비를 잘하고 시험을 잘 통과할 수 있도록 도와줍니다.
Workday Pro Time Tracking 온라인 연습
최종 업데이트 시간: 2026년05월15일
당신은 온라인 연습 문제를 통해 Workday Workday Pro Time Tracking 시험지식에 대해 자신이 어떻게 알고 있는지 파악한 후 시험 참가 신청 여부를 결정할 수 있다.
시험을 100% 합격하고 시험 준비 시간을 35% 절약하기를 바라며 Workday Pro Time Tracking 덤프 (최신 실제 시험 문제)를 사용 선택하여 현재 최신 55개의 시험 문제와 답을 포함하십시오.
정답:
Explanation:
The correct answer is B. Hours Only Time Type.
In Workday Time Tracking, elapsed time means entering the total amount of time worked as a number of hours rather than recording specific start and end punch times. That is exactly the purpose of the Hours Only Time Type. It is used when workers report time by duration, such as 8 hours of regular work, 4 hours of training, or 2.5 hours on a project, without providing in and out timestamps.
This differs from the In/Out Time Type, which is used when workers must record actual clock-style entries such as start time, meal breaks, and end time. That method is appropriate for punch-based populations, but it is not considered elapsed-time entry in the way this question is asking. Absence Table Time Type and Time Off Time Type are related to absence and leave reporting, not standard worked time entered as elapsed hours.
The distinction is important in Workday setup because a worker’s time entry experience depends heavily on the Time Type assigned through the relevant templates and eligibility rules. If the business wants workers to simply enter the amount of time worked rather than exact punches, the appropriate configuration is Hours Only Time Type.
정답:
Explanation:
The correct answer is C. Up to 5 years.
In Workday Time Tracking, the Generate Period Schedule task is used to create future time periods in bulk for a defined period schedule. Rather than manually creating each period one at a time, administrators can use this task to automatically generate a set of future periods so workers, managers, approvals, and downstream payroll processing all have the required calendar structure in place. Workday allows this generation to extend up to 5 years, which gives organizations enough coverage for long-term schedule planning and administrative continuity.
This limit is important because period schedules drive the availability of time entry periods, review cycles, approvals, and closing processes. Generating too short a range may require frequent maintenance, while the system does not allow unlimited generation because controlled administrative maintenance is still expected. That is why Indefinitely is not correct.
The other options are too limited for standard Workday administration. Up to 1 year and Up to 2 years may sound reasonable for some organizations operationally, but they do not reflect the actual supported maximum of the Generate Period Schedule task. Workday provides a broader generation window to reduce repetitive administrative effort.
So, the correct answer is C. Up to 5 years.
정답:
Explanation:
The correct answer is D. The hours are tagged with the Callback Guaranteed Time Calculation Tag.
In Workday Time Tracking, when a default calculation tag is assigned to a Time Entry Code, that tag is automatically applied to time reported with that code unless other calculation logic changes the outcome. This means the time entry itself carries the designated calculation tag into the time calculation process. In this case, if the Time Entry Code has a default calculation tag of Callback Guaranteed Time, then any hours entered using that code will be tagged with Callback Guaranteed Time.
This setup is commonly used to ensure specific kinds of time are consistently identified for later calculation logic, such as guaranteed callback minimums, premiums, or special pay treatment. The tag itself does not automatically determine the pay rate; instead, it marks the hours so the relevant time calculations can recognize and process them correctly.
Option A is incorrect because the worker’s Work Schedule Calendar does not control the default calculation tag placed on a Time Entry Code.
Option B is incorrect because the Time Entry Template does not retag the reported time to another default code in this way.
Option C is incorrect because assigning a calculation tag alone does not directly guarantee payment at time and a half; pay outcomes depend on downstream calculation and payroll configuration.
정답:
Explanation:
The correct answer is B. Lock Time Entry.
In Workday Time Tracking, Lock Time Entry is the function used when an organization wants historical reported time and calculated time results to be locked from further editing by any user. This is typically used after time has been finalized and organizations want to preserve data integrity for payroll, audit, compliance, and historical recordkeeping. Once time is locked, Workday prevents normal editing activity against that time data, which makes it the strongest control for protecting finalized history.
This is different from Close Time Entry. Closing time entry generally controls whether a time entry period is open for entry and processing, but it is not the same as applying a hard lock to historical data. Unlock for Adjustments is the opposite action, used when previously locked time must be reopened in a controlled way for corrections. Open Time Entry is used to allow time entry activity, not to secure finalized data.
The wording in the question is important: it asks for a function that ensures historical reported and calculated time data is permanently locked from editing by any user. In Workday Time Tracking, that requirement aligns most directly with Lock Time Entry, because it is specifically intended to secure finalized time data from further modification.
정답:
Explanation:
The correct answer is B. On the Calculated tab in the Time Block in the Worker’s Time Entry Calendar on the day the hours were worked.
In Workday Time Tracking, a Time Calculation Tag is part of the calculation framework used to identify or classify time after Workday evaluates the entered hours through configured calculation logic. When a rule tags hours worked on the seventh consecutive day, that result is not treated as the original entered time itself. Instead, it is displayed as a calculated result tied to the time block for the relevant date.
That is why these tagged hours appear on the Calculated tab of the worker’s time block. The entered line remains the source time entry, while the calculated section shows the results produced by Workday’s time calculations, such as tagged hours, overtime, premiums, or other rule-based outcomes.
Option D is incorrect because the top line of the time block is generally where the worker’s entered time appears, not the detailed calculation-tag output.
Option A is incorrect because the Work Schedule Calendar reflects planned schedule information, not calculated time-tag results.
Option C is incorrect because View Worker’s Time Eligibility is used to review assigned time tracking components, not to display daily calculated tagged hours.
So the correct display location is the Calculated tab in the time block.
정답:
Explanation:
The correct answer is A. Day Breaker.
In Workday Time Tracking, the Day Breaker defines the point at which one workday ends and the next workday begins for time entry and time calculation purposes. If an organization wants each day to start exactly at 12:00 AM, then the Day Breaker should be set to 12:00 AM. This ensures that time worked before midnight belongs to the prior day, and time worked from midnight onward belongs to the new day.
This setting is especially important for workers who work overnight shifts or whose time spans across calendar dates. Without the correct Day Breaker, hours may be assigned to the wrong workday, which can affect daily totals, overtime calculations, schedule comparisons, and payroll results. Workday uses this function specifically to determine the daily boundary for reported time.
The other options are not correct for this requirement. Work Week Start Day controls the first day of the week, not the daily start time. Day Breaker Divides relates to how calculations may split time around the Day Breaker, but it does not establish the daily boundary itself. Bi-Weekly Calculation Start Date is used for bi-weekly calculation patterns and has nothing to do with the start time of each day.
So the correct function is Day Breaker.
정답:
Explanation:
The correct answer is D. View Worker’s Time Eligibility.
In Workday Time Tracking, when you want to confirm whether a specific worker has been assigned a period schedule, the most direct report is View Worker’s Time Eligibility. This report is used to review which Time Tracking components a worker is currently eligible for and receiving, including items such as time entry templates, approval templates, and period schedules. Since the question is focused on verifying assignment to a worker, this worker-level eligibility view is the most appropriate choice.
The other options do not fit the requirement as well. Audit - Workers with Multiple Time Period Schedules is an exception report used to identify workers who have more than one schedule, not to simply confirm that a worker has one assigned. View Period Schedule lets you inspect the schedule definition itself, but it is not the best worker-specific confirmation tool. Time Entry Period Schedule Review may sound related, but it is not the standard report used to validate a worker’s eligibility-based assignment in the same direct way.
So, if your goal is to ensure that a particular worker is assigned the correct period schedule, the correct report is View Worker’s Time Eligibility.
정답:
Explanation:
The correct answer is B. Create a new eligibility rule using the Copy Condition from Rule option and use an OR operator to apply the conditions.
In Workday Time Tracking, a period schedule is assigned through its Worker Eligibility configuration. If a weekly period schedule already exists and should also apply to a new group of workers, the best practice is not to create a duplicate schedule unless the schedule definition itself is different. Since the schedule already meets the business need, the right approach is to expand the eligibility logic so both the existing worker population and the new worker population can qualify for the same period schedule.
Using Copy Condition from Rule allows you to preserve the existing eligibility criteria and then extend the logic cleanly. The OR operator is important because it lets Workday assign the same schedule to workers who meet either the old rule or the new rule. This avoids disrupting existing workers while adding the new targeted group.
Option A is incorrect because the Worker Eligibility setup does not work as separate parallel rules simply “left in place” that way; the logic typically needs to be consolidated correctly.
Option C is incorrect because creating another schedule with the same name is not the proper solution.
Option D would unnecessarily disrupt the current setup.
So the correct answer is B.
정답:
Explanation:
The correct answer is C. Run the Audit - Workers with Multiple Time Entry Templates report to confirm that there are overlapping assignments.
In Workday Time Tracking, a worker should generally be eligible for only one active time entry template at a time. If a worker already has an existing template assignment and also meets the criteria for a newly created template, the most common issue is overlapping eligibility between templates. When this happens, Workday administrators need an audit tool that specifically identifies workers who match more than one template at the same time.
The Audit - Workers with Multiple Time Entry Templates report is built for exactly this troubleshooting scenario. It helps confirm whether the worker is being picked up by multiple eligibility rules and whether an overlap is preventing the expected result or creating assignment ambiguity. This makes it the most accurate report to run when validating time entry template setup.
Option A only lists templates and does not directly expose worker-level overlap issues.
Option B focuses on work schedule calendars, which is a different setup area and not related to time entry template conflicts.
Option D may provide useful eligibility information, but it is not the primary audit report used to detect overlapping template assignments.
Therefore, the best troubleshooting step is C.
정답:
Explanation:
The correct answer is D. Worker.
In Workday Time Tracking, Time Tracking Eligibility Rules are built by selecting a business object and then defining condition rules based on fields available from that object and its related fields. In this scenario, the eligibility criteria include attributes such as Time Type, Country, and Supervisory Organization. These are evaluated in the context of the worker record, because the rule is determining which workers should receive the new Time Tracking components.
The Worker business object is the correct choice because it serves as the central object for worker-specific eligibility evaluation and allows access to related worker attributes, including employment and organizational data. This makes it possible to create one rule that consistently evaluates all three conditions together for a worker population.
The other options are too narrow. Compensation focuses on pay-related data, Position centers on the job position, and Organization focuses on organizational structures. Although some of the required values may relate to those areas, the eligibility rule itself must evaluate them from the perspective of the worker who is being assigned the Time Tracking setup.
That is why the appropriate business object for this rule is Worker.
정답:
Explanation:
The correct answer is C. Audit - Workers with Multiple Time Entry Templates.
In Workday Time Tracking, a worker should normally be eligible for only one active time entry template at a time. The time entry template controls how the worker records time, such as hours versus in/out entry, required fields, worktags, and related entry behavior. If a worker becomes eligible for more than one template simultaneously, it can create inconsistent time entry behavior and configuration conflicts. To detect this kind of setup issue, Workday provides a dedicated audit report: Audit - Workers with Multiple Time Entry Templates.
This report is specifically designed to identify workers whose eligibility rules cause overlap across templates. That makes it the best tool for administrators who are validating setup and trying to prevent template assignment conflicts before they affect time entry.
Option A, All Time Entry Templates, lists templates but does not specifically identify workers with overlapping eligibility.
Option B, All Time Approval Templates, relates to approval routing, not time entry template eligibility.
Option D, View Worker’s Time Eligibility, can help review an individual worker’s eligibility setup, but it is not the primary audit report used to systematically find workers with multiple time entry templates at the same time.
So the most accurate and purpose-built report is C.
정답:
Explanation:
The correct answer is D. Time Entry template.
In Workday Time Tracking, the Time Entry template controls the structure of the time entry experience for a group of workers. This includes what fields appear during time entry, how time is entered, and whether certain information must be provided before a worker can submit time. When a business wants to make a worktag required, that requirement is configured through the Time Entry template, because the template governs the entry rules and data capture requirements presented to the worker.
This is the correct design point because worktags such as cost center, project, grant, or other organizational tracking values are often needed at the point of entry for labor costing, reporting, or downstream payroll and financial processing. By making the worktag required in the template, Workday enforces that workers supply that value whenever they enter qualifying time.
The other options are not the primary place for this setup. A Worktag is the classification object itself, not the entry-rule configuration component. A Time entry code identifies the type of time being reported, such as regular or training time, but it does not generally control whether a worktag is universally required in the entry interface. A Time Calculation tag is used for calculation logic, not for entry field requirements.
So the correct answer is
D. Time Entry template.
정답:
Explanation:
The correct answer is D. Ad hoc schedule changes.
In Workday Time Tracking, when a manager assigns a work schedule to a worker using the Assign Work Schedule task, that schedule becomes the worker’s standard planned schedule. However, Workday also supports temporary or date-specific exceptions through ad hoc schedule changes. These changes are designed to override the normal assigned schedule for a particular day or period without replacing the worker’s overall schedule assignment. This is useful when a worker has a temporary shift change, a one-time different start and end time, or a short-term adjustment due to business needs.
This is why ad hoc schedule changes are considered the override mechanism. They sit on top of the normal schedule assignment and take precedence for the affected dates.
The other options do not override the assigned work schedule itself. Flextime bands provide flexibility around expected start and end times, but they do not replace the assigned schedule. Schedule deviation calculation is used to compare reported time against schedule expectations and identify variances; it analyzes schedule differences rather than overriding the schedule. Work schedule eligible rules determine which workers can receive certain schedules, but they do not act as overrides after assignment.
So, the component that overrides an assigned work schedule is Ad hoc schedule changes.
정답:
Explanation:
The correct answer is D. Ensure Meal is an allowed out reason in the Allowable Types for Out Time.
In Workday Time Tracking, automatically created meal-break time blocks depend on Workday being able to recognize Meal as a valid Out Time reason for the worker’s in/out configuration. If Meal is not included in the Allowable Types for Out Time, the related setup option for automatic meal-break block creation will not be available because the system has no valid meal event type to generate against.
This is a prerequisite relationship in setup: first, the time entry framework must allow Meal as a valid out-time type; only then can Workday support automated handling tied specifically to meal breaks. Without that allowed type, the system cannot distinguish meal-related out times from other kinds of breaks or punches.
Option C is incorrect because Break and Meal are different out reasons in Workday, and the question specifically asks about meal breaks.
Options A and B focus on the default in/out pattern, which can influence entry behavior, but they do not represent the key prerequisite that unlocks the automatic meal-break configuration. The system must first recognize Meal as an approved out reason.
정답:
Explanation:
The correct answer is D. Monday.
In Workday Time Tracking, when you create a Work Schedule Calendar, the Work Week Start Day field defaults to Monday. This default is important because the work week start day influences how Workday organizes weekly scheduling, displays calendar weeks, and applies certain weekly time calculations. Since many organizations structure operational or reporting weeks from Monday through Sunday, Workday uses Monday as the standard default starting point unless configuration is intentionally changed.
This field matters because it helps define how a worker’s schedule is grouped across the week for planning and tracking purposes. It can affect how managers and administrators interpret weekly patterns, shift rotations, and time-based reporting. Although organizations may later adjust the work week start day based on business requirements, regional practices, or union rules, the initial default value during setup remains Monday.
The other answer choices are incorrect because they are not the standard default delivered in the initial calendar setup. While a company could choose Friday, Saturday, or Sunday for a custom business need, those are configured exceptions rather than the default system behavior.
So, for a newly created Work Schedule Calendar in Workday Time Tracking, the Work Week Start Day defaults to Monday.