300-435 試験問題と解答 - 模擬練習 - 練習問題・模擬試験

Question No : 1
Which script binds a network to a template?
A)

B)

C)

D)

A.Option A
B.Option B
C.Option C
D.Option D

正解:

Question No : 2
DRAG DROP
Drag and drop the code from the bottom onto the box where the code is missing to construct a Python script to automate the process of updating the site-to-site VPN settings of the network. Not all options are used.

正解:

Question No : 3
What are two benefits of leveraging Ansible for automation of Cisco IOS XE Software? (Choose two.)

A.Ansible playbooks are packaged and installed on IOS XE devices for automatic execution when an IOS device reboots.
B.All IOS XE operating systems include Ansible playbooks for basic system administration tasks.
C.It is a device-independent method for automation and can be used with any type of device or operating system.
D.Ansible playbooks can be written from the IOS XE EXEC command line to configure the device itself.
E.It does not require any modules of software except SSH to be loaded on the network device.

正解:
Explanation:
Reference: https://developer.cisco.com/learning/modules/intro-ansible-iosxe/ansible-overview/step/4

Question No : 4
Refer to the exhibit.

The configuration commands are entered in CLI config mode to configure a static telemetry subscription on a Cisco IOS XE device. The commands are accepted by the device, but the consumer receives no telemetry data.
Which change must be made to ensure that the consumer receives the telemetry data?

A.state: true
B.state: started
C.state: present
D.state: installed

正解:
Explanation:
Reference: https://docs.ansible.com/ansible/2.10/collections/cisco/ios/ios_ntp_module.html

Question No : 5
Refer to the exhibit.

How many YANG models does the NETCONF <get> operation interact with?

A.one
B.two
C.three
D.four

正解:
Explanation:
The get operation tag is at the beginning of the document. It interacted only with NTP and its related services. There get operation interacted only with one model.

Question No : 6
Refer to the exhibit.

Which XML tag completes this NETCONF telemetry subscription with a Cisco IOS XE device?

A.crontab
B.cadence
C.frequency
D.period

正解:
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/1610/b_1610_programmability_cg/model_driven_telemetry.html

Question No : 7
Refer to the exhibit.

The configuration commands are entered in CLI config mode to configure a static telemetry subscription on a Cisco IOS XE device. The commands are accepted by the device, but the consumer receives no telemetry data.
Which change must be made to ensure that the consumer receives the telemetry data?

A.The IP address of the receiver must be set.
B.The stream type must be set to YAN
C.The update policy period must be shortened.
D.The sender IP address must be set.

正解:
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/prog/configuration/1610/b_1610_programmability_cg/model_driven_telemetry.html

Question No : 8
Refer to the exhibit.

A Python script is used to configure a Cisco IOS XE device. The script must be updated to
print the IP addresses of all the loopback interfaces.
Which statement should be added before the loop?

A.interfaces = response.json()[“ietf-interfaces:interfaces”]
B.interface = response.json()[“ietf-interfaces:interfaces”]
C.interface = response.json()[“ietf-interfaces:interfaces”][“interface”]
D.interfaces = response.json()[“ietf-interfaces:interfaces”][“interface”]

正解:
Explanation:
Reference: https://blog.wimwauters.com/networkprogrammability/2020-04-04_restconf_python/

Question No : 9
When working with MV Sense APIs, which type of protocol is MQTT based upon?

A.publish-subscribe messaging protocol
B.simple mail transport protocol
C.heavyweight messaging protocol
D.computer vision protocol

正解:
Explanation:
Reference: https://internetofthingsagenda.techtarget.com/definition/MQTT-MQ-Telemetry-Transport

Question No : 10
Which two API calls must be issued to attach a device template in Cisco SD-WAN? (Choose two.)

A.“monitor device action status” GET API request with the device ID to display the status of the attach action
B.“monitor device action status” GET API request with the process ID to display the status of the attach action
C.PUT call to initiate the attach action
D.POST call to initiate the attach action
E.GET call to initiate the attach action

正解:
Explanation:
Reference: https://sdwan-docs.cisco.com/Product_Documentation/Command_Reference/Command_Reference/vManage_REST_APIs/Device_Configuration_APIs/Device_Templat es

Question No : 11
Refer to the exhibit.

NTP server 10.1.1.20 must be configured on the target Cisco IOS XE device without using
authentication and logging.
Which state should be added on a new line at the end of the Ansible task?

A.state: true
B.state: started
C.state: present
D.state: installed

正解:

Question No : 12
CORRECT TEXT
Fill in the blank to complete the statement.

正解: ZTP

Question No : 13
DRAG DROP
Drag and drop the commands to the Ansible playbook that applies configuration to an interface on a Cisco IOS XE device. Not all options are used.

正解:

Question No : 14
Which URI with the request body of Request body:
{“name”:”Test”,”organizationId”:<org_id>,”type”:”appliance”} creates a new Meraki network called “Test”, when using APIs?

A.PUT https://api.meraki.com/api/v0/organizations/<org_id>/networks
B.POST https://api.meraki.com/api/v0/networks
C.POST https://api.meraki.com/api/v0/organizations/<org_id>/networks/<net_id>
D.POST https://api.meraki.com/api/v0/organizations/<org_id>/networks

正解:
Explanation:
Reference: https://documentation.meraki.com/zGeneral_Administration/Other_Topics/The_Cisco_Meraki_Dashboard_API

Question No : 15
DRAG DROP
Refer to the exhibit.

A GET request is issued to the Cisco DNA Center REST API. Drag and drop the GET request URL subpaths from the left onto the objectives on the right. Not all options are used.

正解:

Cisco 300-435 問題練習