Microsoft 70-345 시험

Question No : 1

HOTSPOT
You have an Exchange Server organization. The organization contains four servers.
The servers configured as shown in the following table.



You plan to upgrade the organization to Exchange Server 2016.
You need to identify which servers have functionalities that can be fully achieved by using Exchange Server 2016.
What should you identify? To answer, select the appropriate options in the answer area.

답을 확인하기

정답:

Question No : 2

HOTSPOT
You run the Get-DIpPolicy cmdlet and you receive the following output.






Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the output.

답을 확인하기

정답:

Question No : 3

DRAG DROP
Your company has an Exchange Server 2016 organization. The organization contains three servers and 2,000 mailboxes.
The organization audits all access to user mailboxes.
The company's security policy has the following requirements:
• Audit the name of each administrator who modifies the Exchange Server organization settings.
• Reduce the amount of audit log information generated by a service account named Service1.
• Create an audit entry when an administrator modifies the permissions of another administrative mailbox.
You need to identify which PowerShell cmdlets must be used to meet the requirements.
Which PowerShell cmdlet should you identify for each requirement? To answer, drag the appropriate cmdlets to the correct requirements. Each cmdlet may be used once, more than once or not at all. You may need to drag the split bar between panes or scroll to view content.

답을 확인하기

정답:

Question No : 4

HOTSPOT
You have an Exchange Server 2016 organization.
All users use Microsoft Outlook 2016.
You need to configure the Exchange Server organization to meet following requirements:
• Users must be prevented from receiving a notification when they attempt to send an email message to distribution groups that contain less than 100 members.
• Users must be notified before they send email messages to an unmonitored mailbox named Service1.
Which cmdlet should you run to meet each requirement? To answer, drag appropriate cmdlets to the correct requirements. Each cmdlet must be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

답을 확인하기

정답:

Question No : 5

HOTSPOT
You have an Exchange Server 2016 organization.
The Active directory sites are configured as shown in the following graphic.



Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic

답을 확인하기

정답:

Question No : 6

Your company has three offices. The offices are located in New York, London and Sydney. The offices connect to each other by using a WAN link. Each office connects directly to the Internet.
The company has an Exchange Server organization. The organization contains six mailbox servers.
The servers are configured as shown in the following table.



Each office is configured to use a different Send connector to send email messages to the Internet.
You need to ensure that the servers route email messages that have Internet recipients through their respective site only.
What should you modify?

• A.the permissions of each Send connector
• B.the settings of the site links
• C.the cost of each Send connector
• D.the scope of each Send connector

답을 확인하기

정답:
Explanation:
References: https://msdn.microsoft.com/en-us/library/aa998662(v=exchg.160).aspx?f=255&MSPPError=-2147217396

Question No : 7

HOTSPOT
You have an Exchange Server 2016 organization.
The Active directory sites are configured as shown in the following graphic.



Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

답을 확인하기

정답:

Question No : 8

Your network contains an Active Directory forest that has the site topology shown in the diagram.



You have an Exchange Server 2016 organization. The organization contains three servers.
The servers are configured as shown in the following table.



You have the users described as shown in the following table.



You need to ensure that any email messages sent from User1 to User3 are sent to EX02 first, and then delivered to EX03.
What should you configure?

• A.Site 2 as a hub site
• B.EX02 as an expansion server
• C.the Exchange cost for the site link from Site 2 to Site 3
• D.the Exchange cost for the site link from Site 1 to Site 2

답을 확인하기

정답:
Explanation:
References: https://technet.microsoft.com/en-us/library/aa998825(v=exchg.150).aspx

Question No : 9

You have an Exchange Server 2016 organization. The organization contains three Mailbox servers.
The servers are configured as shown in the following table



You have distribution group named Group1. Group1 contains three members.
The members are configured as shown in the following table.



You discover that when User1 sends email messages to Group1, all of the messages are delivered to EX02 first.
You need to identify why the email messages sent to Group1 are sent to EX02 instead.
What should you identify?

• A.EX02 is configured as an expansion server.
• B.The arbitration mailbox is hosted on EX02.
• C.Site2 has universal group membership caching enabled.
• D.Site2 is configured as a hub site.

답을 확인하기

정답:
Explanation:
References: https://technet.microsoft.com/en-us/library/aa998825(v=exchg.150).aspx

Question No : 10

You have an Exchange Server 2016 organization. The organization contains accepted domains for contoso.com and litwareinc.com. The antimalware engine is enabled on Mailbox servers and uses the default policy. You do not create any custom malware rules. You need to notify internal senders when a malware attachment is detected. The rule must apply only when the recipient domain is contoso.com.
Which two cmdlets should you use? Each correct answer presents part of the solution.

• A.Set-MalwareFilterPolicy
• B.New-MalwareFilterRule
• C.New-MalwareFilterPolicy
• D.Set-MalwareFilterRule

답을 확인하기

정답:
Explanation:
References:
https://technet.microsoft.com/en-us/library/dn306062(v=exchg.160).aspx?f=255&MSPPError=-2147217396
https://technet.microsoft.com/en-us/library/p15680(v=exchg.160).aspx?f=255&MSPPError=-2147217396

Question No : 11

DRAG DROP
You need to configure a distribution group named CustomerService that has the following configurations:
• A user named CSManager must be the only user allowed to add members to CustomerService.
• All email messages sent to CustomerService must be approved by CSManager.
• External users must be allowed to send email messages to CustomerService.
You configure CSManager as the group owner.
What should you configure in the Exchange admin center for each requirement? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar, between panes or scroll to view content.

답을 확인하기

정답:

Question No : 12

You are planning an Exchange Server 2016 organization. The organization will contain a Mailbox server named EX01.
Users will have primary SMTP email addresses in the following domains:
• Contoso.com
• Fabrikam.com
• Cohowinery.com
• Wingtiptoys.com
You need to add a DNS record to provide Autodiscover for each domain.
Which type of record should you create in each zone?

• A.SRV
• B.CERT
• C.MINFO
• D.PTR

답을 확인하기

정답:

Question No : 13

HOTSPOT
Your company has an Exchange Server 2016 organization.
You plan to allow several users to access the mailboxes of the other group.
You need to ensure that a user named User1 can read and delete the email messages in the mailbox of a user named User2. User1 must add the mailbox of User2 manually to the Microsoft Outlook profile.
What command should you run? To answer, select the appropriate options in the answer area.

답을 확인하기

정답:

Question No : 14

You have an Exchange Server 2016 organization. The organization contains several servers.
Users in the marketing department often send Information Rights Management (IRM)-protected email messages. The IRM-protected messages are excluded from eDiscovery searches.
You need to configure the Exchange Server Organization to ensure that the contents of the mailboxes of the marketing department users are searched for all messages that contain the word ProjectX. The solution must prevent the email messages from being deleted permanently.
You user account is a member of the required role group.
Which three actions should you perform? Each correct answer present part of the solution.

• A.Run theNew-Mailboxcmdlet
• B.Run theNew-MailboxSearchcmdlet
• C.Run theSet-IRMConfigurationcmdlet
• D.RuntheSearch-Mailboxcmdlet
• E.Export the results from the discovery mailbox to a personal folders (PST) file, and then use MicrosoftOutlook to open the PST file.
• F.Use Outlook on the web to open the discovery mailbox.

답을 확인하기

정답:
Explanation:
References:
https://technet.microsoft.com/en-us/library/dn440164(v=exchg.160).aspx?f=255&MSPPError=-2147217396
https://technet.microsoft.com/en-us/library/dd353189(v=exchg.160).aspx

Question No : 15

Your company has an Exchange Server 2016 organization named contoso.com.
You need to recommend a solution that meets following requirements:
• A user named Userl must be able to send email messages by using an alias [email protected] the From field.
• Recipients of the messages must be prevented from the identifying the actual sender of the message.
• Userl and a user named User2 must each receive a copy of replies [email protected]
What should you recommend?

• A.Create a distribution group named Sales that has an alias of Sales. Add User1 and User2 to the group. Assign the Send As permissions to User1.
• B.Create a shared mailbox named Sales that has an Alias of Sales. Assign the Receive As permission User1 and User2. Assign the Send As permission to User 1
• C.Create a shared mailbox named Sales that has an Alias of Sales. Assign the Receive As permission User1 and User2. Assign the Send on permission to User 1
• D.Create a distribution group named Sales that has an alias of Sales. Add User1 and User2 to the group. Assign the send on Behalf permission to User1.

답을 확인하기

정답: