72301X 시험 - Avaya실제시험문제와 답 - 93문항

Question No : 1

Refer to the exhibit.

Avaya Tier 3 support receives a case escalated by Tier 2 where the customer cannot receive incoming calls, but can make calls out successfully. The trace shows that the incoming calls arrive at the Avaya Session Border Controller for Enterprise (SBCE) but fail to get routed into the customer enterprise network.
Based on this information, what is and is not working?

A.The local area network, Avaya Aura® Communication Manager, and Avaya Aura® Session Manager are working. SBCE is partially working, but routing may be incorrect.
B.The local area network, Avaya Aura® Communication Manager, and Avaya Aura® Session Manager are working. The public network is not working.
C.The local area network, Avaya Aura® Communication Manager, and Avaya Aura® Session Manager are working. SBCE is not working.
D.The local area network and Avaya Aura® Session Manager are working. Avaya Aura® Communication Manager is not working.

정답:

Question No : 2

A customer reports that none of their users can IM or see each other’s presence. After troubleshooting you discover that default gateway of the Avaya Breeze ™ SM100 has the wrong IP Address in the configuration.
Where would you go to correct this problem?

A.Use Avaya Aura® System Manager web GUI to access the Breeze < Server Administration, and edit the Server Instance.
B.Use Avaya Aura® System Manager web GUI to update the SIP Entity screen.
C.Use SSH to Avaya Breeze ™, and use the route command to correct the routing table.
D.Use SSH to Avaya Breeze ™, and run SMnetSetup.

정답:

Question No : 3

In which way can you check if the Avaya Session Border Controller (SBC) is using the correct server
certificate?

A.Using Avaya SBC, navigate to Dashboard > Security > Certificates
B.Using System Manager (SMGR), navigate to Services > Security > Certificates
C.Using Avaya SBC, navigate to Dashboard > TLS Management > Server Profiles
D.Using System Manager (SMGR), navigate to Dashboard > TLS Management > Certificates

정답:

Question No : 4

Incoming SIP Trunking calls from Service Provider to Session Manager are failing because Avaya Session Border Controller for Enterprise (SBCE) is not sending a domain name in the TO, FROM and REQUEST headers.
What needs to be changed in SBCE to make this happen?

A.In SBCE GUI, navigate to Global Profiles > Routing. Edit the Session Manager Routing Profile to link to a URI Group, which has the To, From and Request Headers and Replace Action set to Overwrite with domain name.
B.In Avaya Session Border Controller for Enterprise (SBCE) GUI, navigate to Global Profiles > Server Configuration > Edit the Session Manager server entry to set “Overwrite Domain Name.”
C.In SBCE GUI, navigate to Global Profiles > Topology Hiding. Edit the SessionManager_TH to change the To, From and Request Headers Replace Action, to Overwrite with domain name.
D.In SBCE GUI, navigate to Device Specific Settings > Endpoint Flows > Server Flows. Edit the Session Manager flow to change the End Point Policy Group to default-low.

정답:

Question No : 5

In Avaya Aura® 7, how are calls typically routed from Avaya Aura® Communication Manager (CM) to Avaya Aura® Messaging (AAM)?

A.Using a direct SIP trunk group between CM and AA
B.Using a direct H323 trunk group between CM and AA
C.Using SIP via Avaya Aura® Session Manager (SM), AAM is built as a user with a Communication Profile and registry routing forwards the calls to AA
D.Using SIP via Avaya Aura® Session Manager (SM), a dial pattern or regular expression forwards the call to AA

정답:

Question No : 6

In Avaya Aura® 7 the Avaya Session Border Controller for Enterprise (SBCE) license is installed on a System Manager (SMGR) WebLM server. The EMS points to the WebLM server using a URL.
What is the correct syntax of the URL where 135.xxx.xxx.xxx. is the IP address of the SMGR WebLM server?

A.https://135.xx.xxx.xx:8443/WebLM/LicenseServer
B.https://135.xx.xxx.xx:8080/LicenseServer
C.https://135.xx.xxx.xx:52233/WebLM/LicenseServer
D.https://135.xx.xxx.xx/WebLM

정답:

Question No : 7

When a customer calls voicemail to retrieve their messages they hear “Hello, to access your mailbox…”
instead of the users named followed by “please enter your password…”.
After troubleshooting you discover that the Caller ID is not being sent correctly, therefore Avaya Aura®
Messaging (AAM) is not able to identify the correct mailbox associated with the station number calling into
AAM.
How can this problem be fixed?

A.Change clid-numbering 0 SAT form to send the correct CLI
B.Using AAM web GUI access Administration > Messaging > Telephone Integration, write a caller ID modification rule to correct the incoming CLID format.
C.In Session Manager, configure a DigitConversionAdapter with ‘fromto=true’ to update the ‘Form’ header as well as the P-asserted-identity, and link it to the AAM SIP Entity.
D.Having identified the trunk group from Avaya Aura® Communication Manager (CM) to AMM is public, change public-unknown-numbering 0 SAT form, to send the correct CLI

정답:

Question No : 8

In Avaya Aura® Messaging (AAM), which Command Line Interface command produces the same output as what is shown on the Process Status Results page in the AAM Web GUI?

A.sysstatus
B.vmstat
C.appstat
D.statapp

정답:

Question No : 9

A customer reports that they cannot place WebRTC calls. You discover there is a problem with communication between Avaya Breeze ™ and the Avaya Aura® Media Server (AAMS).
Where in Avaya Breeze ™ do you set/check the User ID for Restful TLS authentication?

A.Use the System Manager (SMGR) web GUI to access Breeze > Configuration > Avaya Aura Media Server
B.Use the System Manager (SMGR) web GUI to access Breeze > Cluster Administration > General > Cluster Attributes
C.Use the System Manager (SMGR) web GUI to access Breeze > Configuration > Attributes
D.Use the System Manager (SMGR) web GUI to access Breeze > Server Administration > Dashboard

정답:

Question No : 10

In an Avaya Aura® Presence Services (PS) message flow, which type of message does a Remote Worker first send to PS?

A.NOTIFY
B.SUBSCRIBE
C.OPTIONS
D.REGISTER

정답:

Question No : 11

What is the way to check the version of Presence Services snap-in installed on the Avaya Breeze™ platform?

A.Using Avaya Aura® System Manager (SMGR) Navigate to Elements > Engagement Development Platform > Server Administration, and read the Version displayed.
B.Using Avaya Aura® System Manager (SMGR) Navigate to Elements > Engagement Development Platform > Server Management, and read the Version displayed.
C.Using PuTTY SSH to the Avaya Breeze™ platform, login as cust, then execute the swversion command.
D.Using PuTTY SSH to the Avaya Breeze™ platform, login as cust, then execute the swversion C Presence Services command.

정답:

Question No : 12

Which two methods can be used to determine the status of the Switch/CTI Link between Avaya Aura® Communication Manager (CM) and Avaya Aura® Application Enablement Services (AES)? (Choose two.)

A.Observe the AES Alarm Report.
B.Run an ASAI test on AE
C.Observe the CM dashboard.
D.Observe the AES dashboard.
E.Run the status aesvcs cti-link command on C

정답:

Question No : 13

Considering the message flow to an Avaya Aura® Contact Center (AACC) agent, which statement about the media path from the incoming caller is true?

A.It is not anchored on the Avaya Aura® Media Server.
B.It is anchored on the Avaya Aura® Media Server if using SIP agent.
C.It is anchored on the Avaya Aura® Media Server until the agent answers the call.
D.It is anchored on the Avaya Aura® Media Server for the duration of the call.

정답:

Question No : 14

Which three statements about Avaya Breeze ™ with WebRTC Snap-in are true? (Choose three.)

A.WebRTC uses a STUN/TURN server to relay WebRTC media from the public network through to the Avaya Aura® Media Server (AAMS).
B.WebRTC and Presence Services Snap-ins can co-reside on a General Purpose Cluster.
D.The WebRTC Snap-in will validate the authorization token created and encrypted by the web server.
E.The web browser uses the “Cluster IP Address” to reach an Avaya Breeze ™ node when making a WebRTC call.

정답:

Question No : 15

Which method can be used to verify the Client and TSAPI services have been administered correctly?

A.The TSAPI test is call initiated from CTI endpoints using SIP telephones.
B.The TSAPI test is call initialed from within Avaya Aura® Communication Manager (CM) command line using the test TSAPI interface command.
C.The TSAPI test is call initiated within the TSAPI web interface > TSAPI Monitoring Tool menu.
D.The TSAPI test is call initiated within the Utilities > Diagnostics > AE ServiceTSAPI Test menu.

정답:

Avaya 72301X 시험