매달, 우리는 1000명 이상의 사람들이 시험 준비를 잘하고 시험을 잘 통과할 수 있도록 도와줍니다.
Delta - HPE Hybrid Cloud Solutions 온라인 연습
최종 업데이트 시간: 2024년11월08일
당신은 온라인 연습 문제를 통해 HP HPE0-V26 시험지식에 대해 자신이 어떻게 알고 있는지 파악한 후 시험 참가 신청 여부를 결정할 수 있다.
시험을 100% 합격하고 시험 준비 시간을 35% 절약하기를 바라며 HPE0-V26 덤프 (최신 실제 시험 문제)를 사용 선택하여 현재 최신 61개의 시험 문제와 답을 포함하십시오.
정답:
Explanation:
According to HPE, SmartSSD Wear Gauge is a feature that provides an estimate of the remaining useful life of an SSD drive based on its usage patterns1. It can help you monitor the health and performance of your SSD drives and plan for replacement or upgrade when needed1.
정답:
Explanation:
Library and Tape Tools and HPF StoreEver TapeAssure Advanced Software: This combination is correct, as Library and Tape Tools (L&TT) is a diagnostic tool that allows you to perform firmware upgrades, run tests, and verify data on tape devices. HPE StoreEver TapeAssure Advanced Software is a software that provides data integrity, performance, health, and utilization reports for tape drives and cartridges, and it works with L&TT to perform data verification
정답: 
Explanation:
To set the email notification option, you need to go to the "Administration" tab and select the "Management" option. Then you need to enter the email address and SMTP server information in the "AlertMail" section and enable the "AlertMail" feature. You can also specify which events you want to receive emails for by selecting the appropriate severity level.
정답:
Explanation:
one of the topics covered in the module 4 of the Implementing HPE MSA Storage Solutions course is "Explain the firmware update process on MSA". This suggests that the firmware update is a maintenance task that can be performed with the Storage Management utility v4.
정답: 
Explanation:
HPE workload profile is one of the HPE Intelligent System Tuning (IST) features and allows you to tune the resources in your HPE ProLiant server by choosing a preconfigured workload profile. The server will automatically configure the BIOS settings to match the selected workload12.
According to the information I found on the web, here is how you can match the preconfigured HPE workload profile with its definition:
* General power efficient compute: This is a default out-of-the-box profile that uses the most common performance settings seen across most application workloads. It also enables power management settings that have minimal impact to overall performance. This profile is recommended for customers that do not typically tune their BIOS for their workload1.
* IO throughput: This profile is intended for configurations that depend on maximum throughput between IO and memory. It disables power management settings that are known to have impact on maximum achievable bandwidth. It also applies settings that benefit NUMA awareness, as best throughput is achieved when the workload is also NUMA aware and optimized1.
* Graphics processing: This profile is intended for configurations that use GPUs and depend on maximum bandwidth between IO and memory. It disables power management settings that are known to have impact on maximum achievable bandwidth. It also applies settings that benefit NUMA awareness, as best throughput is achieved when the workload is also NUMA aware and optimized1.
* Virtualization -Max Performance: This profile setting will ensure that all available virtualization technologies are enabled and configured for maximum performance. It disables power management settings in favor of delivering maximum performance. Certain virtualization technologies can have possible performance impacts to nonvirtualized environments and can be disabled in other profiles
정답: 
Explanation:
* HPE Product Bulletin:Aides with the purchase, sale, and support of HPE solutions by providing technical overviews and specifications.
* HPE CloudPhysics:Provides data-driven insights to improve IT performance, ROI, and data protection through analysis of IT metadata.
* Solution Sales Enablement Tool:Provides curated information about HPE strategy and solutions as well as sales, marketing, and technical information aligned to specific solutions.
* HPE Seismic:Accurately size and efficiently deliver world-class solutions on HPE GreenLake Lighthouse, which powers HPE GreenLake Cloud services and HPE infrastructure.
* HPE Product Bulletin:https://h20195.www2.hpe.com/v2/GetDocument.aspx?docname=c04123144
* HPE CloudPhysics:https://www.hpe.com/us/en/storage/cloudphysics.html
* Solution Sales Enablement Tool:https://sset.ext.hpe.com/
* HPE
Seismic: https://www.hpe.com/us/en/newsroom/blog-post/2021/02/hpe-reimagines-customer-and-partner-e
정답:
Explanation:
HPE RapidDR: This license is correct, as HPE RapidDR is a disaster recovery orchestration tool that automates the failover of a pre-configured set of virtual machines from a production site to a recovery site on HPE SimpliVity. It leverages the built-in backup and replication capabilities of HPE SimpliVity and simplifies the disaster recovery process.
HPE SimpliVity is a hyperconverged infrastructure solution that combines compute, storage, networking, and data services in a single platform. It provides high performance, efficiency, and resiliency for various workloads, including edge, VDI, and general virtualization
정답: 
Explanation:
* NAS: c) Sharing files over industry standard protocols such as NFSv4 or SMB.
* SAN: a) Block access using a FC protocol. or b) Block access using FCoE protocol or d) Block access using the iSCSI protocol.
According to the HPE website, NAS stands for Network Attached Storage and is a storage system that provides file-level access to data over a network. NAS devices use protocols such as NFSv4 or SMB to share files with clients. NAS devices typically have their own file system and operating system and can support multiple users and applications.
SAN stands for Storage Area Network and is a network that provides block-level access to data over a dedicated network. SAN devices use protocols such as FC, FCoE, or iSCSI to transfer blocks of data to servers. SAN devices do not have their own file system and rely on the servers to manage the data.
SAN devices typically provide high performance and availability for mission-critical applications.
정답:
Explanation:
setting that must be enabled to allow a 3TB boot partition on their HPE ProLiant DL360 Gen10 Plus server is B.
Unified Extensible Firmware Interface (UEFI) Boot Mode. This is because UEFI Boot Mode supports booting from disks larger than 2.2 TB by using the GUID Partition Table (GPT) format. GPT allows for partitions of up to 9.4 ZB (9.4 x 10^21 bytes) in size.12
정답: 
Explanation:
HPE MSA2062 -> Provides storage for two HPE ProLiant DL380 Gen10 servers in a branch office1 HPE SimpliVity -> Enterprise HCI with integrated compute storage and data protection2 HPE StoreEver LTO 9 Ultruim 45000 External Tape Drive -> Secures backup data with an air-gap separation3 HPE StoreOnce 3660
-> Provides a disk-based backup functionality with efficient deduplication
정답:
Explanation:
HPE InfoSight, an AI-driven analytics platform, supports automatic case creation for certain HPE products. In the context of ProLiant and MSA systems, the HPE MSA 2062 storage system is the product that supports automatic case creation through InfoSight. This feature helps streamline the support process and proactively resolve issues, improving the overall management and maintenance of the customer's environment.
정답:
Explanation:
According to HPE, iLO 5 is a remote management solution that enables you to configure, monitor, and update your HPE servers seamlessly from anywhere in the world1. It also provides firmware update capabilities for HPE ProLiant MicroServer Gen10 Plus servers2. With iLO 5, you can demonstrate how to update the firmware for multiple servers easily and securely.
정답:
Explanation:
Core Boosting technology uses a relaxed and optimized turbo profile that adapts the processor to specific use cases, configurations, and environments. Core Boosting processors take advantage of extra server power and thermal headroom provided by an innovative HPE voltage regulator design and by cooling technologies.
Consequently, systems that have Core Boosting processors can alleviate common setbacks and maximize processor computing power.
However, Core Boosting option is only supported in ProLiant Gen10 servers with certain Intel processors1
. The HPE ProLiant DL380 Gen10 server data sheet lists the supported processors for Core Boosting as:
* Intel Xeon Gold 6148 Processor (20 core, 2.4 GHz, 27.5 MB L3 cache)
* Intel Xeon Gold 6154 Processor (18 core, 3.0 GHz, 24.75 MB L3 cache)
* Intel Xeon Gold 6152 Processor (22 core, 2.1 GHz, 30.25 MB L3 cache)
* Intel Xeon Platinum 8168 Processor (24 core, 2.7 GHz, 33 MB L3 cache) Therefore, if your customer's DL380 Gen10 servers are running workloads on more active cores at higher clock frequencies, they can benefit from Core Boosting technology if they have one of these supported Intel processors.
정답: 
Explanation:
* RAID 0: This level has zero overhead from capacity perspective, as it uses all the available disk space for data storage without any redundancy or parity. However, it also has no fault tolerance and if one disk fails, all data is lost12.
* RAID 1: This level has capacity of one drive as overhead, as it uses disk mirroring to create an exact copy of data on two or more disks. This provides high reliability and fault tolerance, but reduces the usable disk space by half12
* RAID 5: This level has capacity of one drive as overhead, as it uses disk striping with parity to distribute data and parity blocks across three or more disks. This provides a balance between performance and reliability, as it can tolerate one disk failure without losing data
* RAID 6: This level has capacity of two drives as overhead, as it uses disk striping with double parity to distribute data and two parity blocks across four or more disks. This provides higher reliability and fault tolerance than RAID 5, as it can tolerate two disk failures without losing data12.
정답: 
Explanation:
F10 Save