HP HPE6-A75 시험

Question No : 1

Refer to the exhibit.



An AD user's department attribute is configured as *HR". The user connects on Monday using their Windows Laptop to a switch that belongs to the Device Group HQ.
Which role is assigned to the user in ClearPass?

• A.Executive
• B.iOS Device
• C.Vendor
• D.Remote Employee
• E.HR Local

답을 확인하기

정답:

Question No : 2

CORRECT TEXT
Which is a valid policy simulation types in ClearPass? (Select three.)

• A.Enforcement Policy
• B.Posture token derivation
• C.Role Mapping
• D.Endpoint Profiler
• E.Chained simulation

답을 확인하기

정답:

Question No : 3

An administrator implements the MultiZone feature and uses two clusters that utilize CPSec. A primary and a data zone are created. MultiZone APs successfully build sessions to the primary cluster but fail to establish sessions to the data zone cluster.
What must the administrator do to solve this problem?

• A.Enable CPSec in the MultiZone profile for both the primary and data zone.
• B.Enable MultiZone booting in the MultiZone AP apboot configuration mode.
• C.Add the MultiZone APs to the data zone’s CPSec whitelist.
• D.Use different AP Group names for the two zones.

답을 확인하기

정답:

Question No : 4

in a VPN that uses certificate-based authentication, which component must be configured on the Mobility Master (MM) to allow a RAP to successfully connect to a Mobility Controller (MC)

• A.RAP VPN username and password
• B.WLAN and new RAP group
• C.RAP IPSec pre-shared key
• D.RAP whitelist

답을 확인하기

정답:

Question No : 5

Refer to the exhibit.



Several interfaces on an AOS-Switch enforce 802. IX to a RADIUS server at 10.254.378.521. The interface 802. IX settings are shown in the exhibit, and 802. IX is also enabled globally. The security team have added a requirement tor port security on the interfaces as well.
Before administrators enable port security, which additional step must they complete to prevent issues?

• A.Set an 802. l X client limit on the interfaces.
• B.Manually add legitimate MAC addresses to the switch authorized MAC list.
• C.Enable eavesdropping protection on the interfaces.
• D.Enable DHCP snooping on VLAN 20.

답을 확인하기

정답:

Question No : 6

Refer to the exhibit.



A company has attempted to implement OSPF without success. The devices in Area I need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas.
What must be changed to meet these requirements?

• A.Change Area 3 to Area 0; remove Area 1 from Switch-2 and Area 2 from Switch-1.
• B.Add the 10.2.0.0/16 range on Swttch-1 and the 10.1.0.0/16 range on Switch-2.
• C.Add Area 1 and Area 2 on VIAN 100 on both Switch-1 and Switch-2. Remove Area 3.
• D.Move the 10.1.0.0/16 range to Area 2 on Switch-1 and the 10.2.0.0/16rangetoArea 1 onSwitch-2.

답을 확인하기

정답:

Question No : 7

What must an OSPF router do when it receives a link state update?

• A.It must participate in a new election for the Designated Router and Backup D
• B.It must initiate a graceful restart timer.
• C.It must re-establish adjacency with its Designated Router and Backup D
• D.It must run the shortest path first algorithm.

답을 확인하기

정답:

Question No : 8

Refer to the exhibit.



An administrator implements AP licensing on a Mobility Master (MM).
• Each campus is responsible to purchase its own AP licenses.
• There are 900 AP licenses deployed in the global pool
• There are three dedicated pools.
• From the global pool, 300 AP licenses are assigned to each dedicated pool.
Network engineers at CampusA want to deploy an additional 100 APs. Currently all of the AP licenses in CampusA and CampusB are allocated, but only 200 of the AP licenses m CampusC are allocated.
What can the administrator do to add capacity for CampusA in alignment with campus policies?

• A.Allow CampusA to share from the CampusC pool.
• B.Add 100 more AP licenses and assign them to the CampusA pool.
• C.Move 100 licenses from the CampusC pool to the global pool.
• D.Add 100 more AP licenses to the global pool.

답을 확인하기

정답:

Question No : 9

A company requires AOS-Switches at the campus core. The switches:
✑ Will act as the default gateways for several campus VLANs
✑ Must provide redundancy for their services and tolerate the loss of a link or an entire switch
✑ Must recover from the failure of one of the switches within a second or less
VRRP and MSTP are proposed to meet these requirements.
What is an issue with this proposal?

• A.VRRP provides redundancy against lost links but not a failed switch.
• B.VRRP provides routing redundancy but not default gateway redundancy.
• C.VRRP does not interoperate with MST
• D.VRRP takes longer than a second to fail over.

답을 확인하기

정답:

Question No : 10

Which protocol do Mobility Controllers (MCs) use to detect a failed Mobility Master (MM)?

• A.VRRP
• B.SNMP
• C.PAPI
• D.IPSec

답을 확인하기

정답:

Question No : 11

A network administrator can set the OSPF metric-type on an AOS-Switch to Type 1 or Type 2.
What is the difference?

• A.A Type 2 metric marks external routes that can be advertised in NSSAs, while a Type 1 metric marks external routes that can only be advertised in normal areas.
• B.A Type 2 metric assigns cost 1 to a 100 Gbps link, while a Type 1 metric assigns cost 1 to all links of 100 Mbps or higher.
• C.A Type 2 metric is assigned to multiple external routes that are aggregated together, while a Type 1 metric does not permit external route aggregation.
• D.A Type 2 metric stays the same as the external route is advertised, while a Type 1 metric increments with internal OSPF link costs.

답을 확인하기

정답:

Question No : 12

An administrator creates service-based policies for AirGroup on the Mobility Master (MM).
The administrator can define location-based policy limits based on which information?

• A.AP names, AP groups, controller names, and controller groups
• B.AP Fully Qualified Location Names (FQLNs) and controller Fully Qualified Domain Names (FQDNs)
• C.AP names, AP groups, and AP Fully Qualified Location Names (FQLNs)
• D.Controller names, controller groups, and controller Fully Qualified Domain Names (FQDNs)

답을 확인하기

정답:

Question No : 13

Refer to the exhibit.



Based on the Policy configuration shown, which VLAN will be assigned when a user with ClearPass role Engineer authenticates to the network successfully on Saturday using connection protocol WEBAUTH?

• A.Deny Access
• B.Employee VLAN
• C.Internet VLAN
• D.Full Access VLAN

답을 확인하기

정답:

Question No : 14

Refer to the exhibit.



Based on the configuration for the client's certificate private key as shown, which statements accurately describe the settings? (Select two.)

• A.More bits in the private key will increase security.
• B.The private key for TLS client certificates is not created.
• C.The private key is stored in the ClearPass server.
• D.More bits in the private key will reduce security.
• E.The private key is stored in the user device.

답을 확인하기

정답:

Question No : 15

An administrator supports a RAP to a branch office. Employees at the branch office connect to an employee SSID that allows for split tunneling of the employee traffic. The RAP initially connects to the corporate office controller, but later loses connectivity to it.
Which operating mode should the administrator configure for a secondary SSID to be advertised during the loss of connectivity?

• A.Standard
• B.Persistent
• C.Always
• D.Backup

답을 확인하기

정답: