NS0-184 시험 - Network Appliance실제시험문제와 답 - 371문항

Question No : 1

You are adding nodes to an existing cluster. In this scenario, which three statements are correct? (Choose three.)

A.If you are adding a second node to a single-node cluster, the second node must have been installed, but the cluster network can be configured later.
B.You must add a cluster switch for every two nodes.
C.If you are adding nodes to a multiple-node cluster, more than half of the existing nodes in the cluster must be healthy.
D.The switchless cluster functionality is supported only in a single or two-node cluster.
E.If you are adding nodes to a two-node switchless cluster, you must have installed and configured the cluster management and interconnect switches before adding additional nodes.

정답:

Question No : 2

When you configure EMS to send event notifications, which customer data do you need to include? (Choose two.)

A.the IP of the company's web server
B.the name of the mail server
C.the administrator's phone number
D.the SNMP community string

정답:

Question No : 3

You want to add additional nodes to a cluster.
Which action will complete this task?

A.Run the node join command on the new nodes.
B.Run the cluster setup command on the new nodes.
C.Run the cluster join command on the existing cluster.
D.Run the cluster setup command on the existing cluster.

정답:

Question No : 4

Which two configurations use root-data-data partitioning? (Choose two.)

A.FAS8080 with 1.8 TB external SAS drives
B.AFF A800 with 3.8 TB internal NVMe SSD drives
C.FAS2650 with 1.8 TB internal SAS drives
D.AFF A220 with 3.8 TB internal SSD drives

정답:

Question No : 5

According to NetApp, how many interswitch links (ISL) for a CN1610 switch are recommended for the cluster network?

A.4 ISLs
B.3 ISLs
C.2 ISLs
D.1 ISLs

정답:

Question No : 6

You are preparing to install a new 4-node cluster for your customer. They want to use NetApp CN1610 cluster switches that they previously purchased.
Which software must be downloaded to ensure that you are well prepared for this installation?

A.You must download CN1610 firmware and RCF files compatible with the clustered Data ONTAP version that your customer wants to use.
B.You must download the Cisco configuration files compatible with the clustered Data ONTAP version that your customer wants to use.
C.You must download ATTO Fibre Bridge firmware.
D.You must download the System Setup tool.

정답:

Question No : 7

Multiple customers want to access a cluster from different domains that may contain duplicate IP addresses.
In this situation, which feature should you use?

A.IPspaces
B.interface groups
C.VLAN
D.logical interfaces

정답:

Question No : 8

You need to move a LIF to another port or to another node which requires certain configuration settings.
Which two conditions should be verified before beginning this operation? (Choose two.)

A.The destination node and ports must be operational and able to access the same network as the source port.
B.The only ports that can be added to a failover group are VLANs.
C.A failover group must exist for the LIFs.
D.The destination port must be a member of a different broadcast domain.

정답:

Question No : 9

A customer must create VLAN 599 tagging on physical port e0g from cluster node filer1-01.
What is the name of the new VLAN interface?

A.e0g-vlan599
B.vlan599-e0g
C.vl599-e0g
D.e0g-599

정답:

Question No : 10

You were dispatched to add a DS224C to an existing HA pair that has a stack of DS4243 shelves with 1 TB drives and a stack of DS4246 shelves with 1 TB drives. The customer wants to make sure that ACP is cabled for all shelves.
Which two considerations should you advise the customer in this situation? (Choose two.)

A.ACP communication uses SAS cables and does not require Ethernet cables for IOM12 and IOM6 modules.
B.ACP communication cannot be used for the DS224C and the DS4243 shelves at the same time.
C.In-Band ACP communication is use by default in ONTAP 9.0 and later software.
D.The ACP communication has been discontinued beginning with ONTAP 9.1, IOM6, and IOM12 modules.

정답:

Question No : 11

You are installing a new cluster with a pair of NetApp CN1610 switches.
Which three statements describe how the ports are configured according to NetApp best practices? (Choose three.)

A.Ports 13-16 are designated as cluster host ports.
B.All ports have standard frames enabled.
C.Ports 13-16 are designated as Inter-Switch Links (ISLs),
D.Ports 1 12 are designated as cluster host ports.
E.All ports have jumbo frames enabled.

정답:

Question No : 12

At a new Installation, you run Config Advisor and see the warnings shown In the exhibit.
What should you do to correct the warnings on the node?

A.Set the flow control on all the 10GbE ports to none, and delete the AutoSupport settings.
B.Set the flow control on all of the l0GbE or 40GbE cluster interconnect ports to None.
C.Delete all of the AutoSupport settings, and change the flow control to full.
D.Set the flow control on all the lGbE ports to match the 10GbE pods.

정답:

Question No : 13

You have just added a new DS4246 shelf with 24 x 10 TB SATA HDDs to a single FAS2650 node as the first SATA shelf. You must keep two SATA spare disks on the shelf.
What Is the maximum number of SATA data disks available in this scenario?

A.19
B.16
C.22
D.20

정답:

Question No : 14

You installed a new FAS9000 with SAS disk shelves. You want to use write cache in this environment.
In this scenario, what should you do to accomplish this task?

A.You need to buy an SSD and set it up as a storage pool for write cache that is used for the aggregate that you need.
B.You need to buy an SSD and set it up as a Flash Pool for write cache that is used at the node that had an SS
C.You need to set up the caching policy as your requirement by using the Flash Cache NVMe module.
D.You need to buy an SSD and set it up as a Flash Pool for write cache that is used at the aggregate that had an SS

정답:

Question No : 15

Exhibit.

You are asked to install a 6-node cluster running clustered Data ONTAP 9 using Cisco switches. The customer has installed Config Advisor on a PC on their network and has asked you to help them collect data.
Referring to the exhibit, which three parameters should be selected? (Choose three.)

A.Enable management switch checks
B.Switchless
C.Enable cluster switch checks
D.Cisco NX5010/NX5020/5596/5596T
E.NetApp CN1610/CN1601

정답:

Network Appliance NS0-184 시험