NSE5_FMG-6.4 시험 - Fortinet실제시험문제와 답 - 65문항

Question No : 1

What are two outcomes of ADOM revisions? (Choose two.)

A.ADOM revisions can significantly increase the size of the configuration backups.
B.ADOM revisions can save the current size of the whole ADOM
C.ADOM revisions can create System Checkpoints for the FortiManager configuration
D.ADOM revisions can save the current state of all policy packages and objects for an ADOM

정답:
Explanation:
Reference: https://docs2.fortinet.com/document/fortimanager/6.0.0/best-practices/101837/adom-revisions

Question No : 2

Which two items does an FGFM keepalive message include? (Choose two.)

A.FortiGate uptime
B.FortiGate license information
C.FortiGate IPS version
D.FortiGate configuration checksum

정답:
Explanation:
Reference: https://docs.fortinet.com/document/fortimanager/6.2.0/fortigate-fortimanager-communications-protocol-guide/579138/keep-alive-messages

Question No : 3

An administrator run the reload failure command: diagnose test deploymanager reload config <deviceid> on FortiManager.
What does this command do?

A.It downloads the latest configuration from the specified FortiGate and performs a reload operation on the device database.
B.It installs the latest configuration on the specified FortiGate and update the revision history database.
C.It compares and provides differences in configuration on FortiManager with the current running configuration of the specified FortiGate.
D.It installs the provisioning template configuration on the specified FortiGate.

정답:
Explanation:
Reference: https://community.fortinet.com/t5/FortiManager/Technical-Note-Retrieve-configuration-file-using-CLI-from-a/ta-p/191000?externalID=FD36387

Question No : 4

An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?

A.FortiManager will not allow the administrator to delete a referenced address object
B.FortiManager will disable the status of the referenced firewall policy
C.FortiManager will replace the deleted address object with the none address object in the referenced firewall policy
D.FortiManager will replace the deleted address object with all address object in the referenced firewall policy

정답:
Explanation:
Reference: https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1200_Policy%20and%20Objects/1200_Managing%20object s/0800_Remove%20an%20object.htm

Question No : 5

Refer to the exhibits.
Exhibit one.

Exhibit two.

An administrator created a new system template named Training with two new DNS addresses on FortiManager. During the installation preview stage, the administrator notices that many unset commands need to be pushed.
What can be the main reason for these unset commands?

A.The DNS addresses in the default system settings are the same as the Training system template
B.The Training system template has other default settings
C.The ADOM is locked by another administrator
D.The Training system template does not have assigned devices

정답:

Question No : 6

Which two statements about the scheduled backup of FortiManager are true? (Choose two.)

A.It does not back up firmware images saved on FortiManager.
B.It can be configured using the CLI and GU
C.It backs up all devices and the FortiGuard database.
D.It supports FTP, SCP, and SFT

정답:
Explanation:
Reference: https://docs.ansible.com/ansible/latest/collections/fortinet/fortimanager/fmgr_system_backu p_allsettings_module.html

Question No : 7

View the following exhibit.

Which statement is true regarding this failed installation log?

A.Policy ID 2 is installed without a source address
B.Policy ID 2 will not be installed
C.Policy ID 2 is installed in disabled state
D.Policy ID 2 is installed without a source device

정답:

Question No : 8

View the following exhibit.

What is the purpose of setting ADOM Mode to Advanced?

A.The setting allows automatic updates to the policy package configuration for a managed device
B.The setting enables the ADOMs feature on FortiManager
C.This setting allows you to assign different VDOMs from the same FortiGate to different ADOMs.
D.The setting disables concurrent ADOM access and adds ADOM locking

정답:
Explanation:
Reference: https://docs.fortinet.com/document/fortianalyzer/7.0.0/administration-guide/66530/adom-device-modes

Question No : 9

What will happen if FortiAnalyzer features are enabled on FortiManager?

A.FortiManager will reboot
B.FortiManager will send the logging configuration to the managed devices so the managed devices will start sending logs to FortiManager
C.FortiManager will enable ADOMs automatically to collect logs from non-FortiGate devices
D.FortiManager can be used only as a logging device.

정답:
Explanation:
Reference: https://help.fortinet.com/fmgr/50hlp/56/5-6-1/FortiManager_Admin_Guide/1800_FAZ%20Features/0200_Enable%20FAZ%20Features.htm

Question No : 10

You are moving managed FortiGate devices from one ADOM to a new ADOM.
Which statement correctly describes the expected result?

A.Any pending device settings will be installed automatically
B.Any unused objects from a previous ADOM are moved to the new ADOM automatically
C.The shared policy package will not be moved to the new ADOM
D.Policy packages will be imported into the new ADOM automaticallyD

정답:
Explanation:
Reference: https://community.fortinet.com/t5/FortiManager/Technical-Note-How-to-move-objects-to-new-ADOM-on-FortiManager/ta-p/198342

Question No : 11

When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?

A.After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.
B.FortiManager will revert and install a previous configuration revision on the managed FortiGate.
C.FortiGate will reject the CLI commands that will cause the tunnel to go down.
D.FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.

정답:
Explanation:
Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/067f5236-ca6d-11e9-8977-00505692583a/FGFM-6.2-Communications_Protocol_Guide.pdf page 17

Question No : 12

Which two settings must be configured for SD-WAN Central Management? (Choose two.)

A.SD-WAN must be enabled on per-ADOM basis
B.You can create multiple SD-WAN interfaces per VDOM
C.When you configure an SD-WAN, you must specify at least two member interfaces.
D.The first step in creating an SD-WAN using FortiManager is to create two SD-WAN firewall policies.

정답:

Question No : 13

An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators.
How should the Workspace mode be configured on FortiManager?

A.Set to workflow and use the ADOM locking feature
B.Set to read/write and use the policy locking feature
C.Set to normal and use the policy locking feature
D.Set to disable and use the policy locking feature

정답:
Explanation:
Reference: https://help.fortinet.com/fmgr/50hlp/52/5-2-0/FMG_520_Online_Help/200_What's-New.03.03.html

Question No : 14

Refer to the exhibit.

Which two statements about the output are true? (Choose two.)

A.The latest revision history for the managed FortiGate does match with the FortiGate running configuration
B.Configuration changes have been installed to FortiGate and represents FortiGate configuration has been changed
C.The latest history for the managed FortiGate does not match with the device-level database
D.Configuration changes directly made on the FortiGate have been automatically updated to device-level database

정답:
Explanation:
STATUS: dev-db: modified; conf: in sync; cond: pending; dm: retrieved; conn: upC
dev-db: modified C This is the device setting status which indicates that configuration changes were made on FortiManager.C conf: in sync C This is the sync status which shows that the latest revision history is in sync with Fortigate’s configuration.C cond: pending C This is the configuration status which says that configuration changes need to be installed.
Most probably a retrieve was done in the past (dm: retrieved) updating the revision
history DB (conf: in sync) and FortiManager device level DB, now there is a new
modification on FortiManager device level DB (dev-db: modified) which wasn’t installed to FortiGate (cond: pending), hence; revision history DB is not aware of that modification and doesn’t match device DB.
Conclusion:C Revision DB does match FortiGate.C No changes were installed to FortiGate yet.C Device DB doesn’t match Revision DB.C No changes were done on FortiGate (auto-update) but configuration was retrieved instead
After an Auto-Update or Retrieve:device database = latest revision = FGT
Then after a manual change on FMG end (but no install yet):latest revision = FGT (still) but now device database has been modified (is different).
After reverting to a previous revision in revision history:device database = reverted revision != FGT

Question No : 15

Which configuration setting for FortiGate is part of a device-level database on FortiManager?

A.VIP and IP Pools
B.Firewall policies
C.Security profiles
D.Routing

정답:
Explanation:
The FortiManager stores the FortiGate configuration details in two distinct databases. The device-level database includes configuration details related to device-level settings, such as interfaces, DNS, routing, and more. The ADOM-level database includes configuration details related to firewall policies, objects, and security profiles.

Fortinet NSE5_FMG-6.4 시험